Appliances shape how a kitchen works every day, and they also shape the cabinet openings, the ventilation, and the electrical or gas work behind the walls. In a complete renovation they should be chosen while the room is still being designed, not after the boxes are already on order.
Kitchen Design Studio & Remodeling of Atlanta plans appliances as part of a complete kitchen renovation. The goal is a set that fits the way you cook, fits the layout, and can be installed cleanly with the cabinets and the counters.
Choose the appliances while the kitchen is being designed
Every refrigerator, range, dishwasher, and wall oven has a required opening, a door swing, and a clearance to the nearest cabinet or island. If those numbers arrive late, the cabinet plan has to be redrawn, or the appliance has to be swapped. We ask for the model list early, confirm the dimensions, and only then lock the cabinet drawings.
This is also the moment to decide what you actually need. A household that bakes often may want a wall oven and a separate cooktop. A household that cooks on one surface may be better served by a range. There is no single right set. The right set is the one that matches how the room is used and that the layout can support.
Layout, clearances, and traffic
The refrigerator, the cooking surface, and the sink still need a clear relationship, even when the rest of the finishes are new. Leave room for doors and drawers to open without hitting each other, and leave a landing surface next to the refrigerator and the oven. A path through the kitchen should not cut across someone who is standing at the range.
If the kitchen will open to a living or dining room, appliance placement matters even more, because the back of a refrigerator or the hum of a dishwasher is no longer hidden by a wall. Our open-concept kitchen service is the place we work through those layout questions when a wall is coming down.
Cooking appliances and ventilation
A cooktop or range is only as pleasant to live with as the ventilation above it. The hood should cover the cooking surface and vent as the house allows, with a duct path planned through the cabinets or the ceiling. That path is much easier to build during a complete renovation than to invent later. If the cooking surface moves into an island, the ventilation and the utility lines have to be designed with the island, not added underneath it after the fact.
Fuel type is a design decision as well as a preference. Gas and electric each have different rough-in needs, and some kitchens use both. We confirm what the house can support and what the layout can hide before anyone orders the unit.
Refrigeration, cleanup, and the cabinet work around them
Refrigerators need space for the doors and, on many models, a little extra room for air at the back or sides. Panels or a cabinet return can help a refrigerator sit in line with the rest of the run, but only if the model is known when the cabinets are drawn. The dishwasher should sit where it can be loaded next to the sink without blocking the main walkway, and the trash or recycling pull-out should be close enough that the two work as a pair.
Smaller tools, from a microwave to a coffee setup, also need a home that is not the middle of the counter. A shelf, a cabinet, or a dedicated niche planned in the elevation keeps those pieces from taking over the work surface.
Finishes, electrical work, and permits
Appliance finishes should sit comfortably with the cabinet color and the hardware. A single finish across the large pieces usually looks calmer than a mix that was not planned. Handles and the direction doors open can be specified to match the way you move through the room.
New or relocated electrical circuits, gas lines, and vents are typically part of a complete kitchen renovation, and they often need a permit. We pull those permits and schedule the inspections. If you are in or near Sandy Springs, our Sandy Springs kitchen and bath renovations page is a starting point for work in that city, and a free consultation is how we begin a plan for your house.
Frequently asked questions
When should appliances be chosen in a kitchen remodel?
During design, before the cabinets are ordered. The model you choose sets the opening, the clearances, the ventilation, and any electrical or gas work that has to be roughed in while the walls are open.
What happens if I pick appliances after the cabinets are built?
The opening may not match, the doors may not have room to swing, or the hood may not line up with the cooktop. We would rather hold the cabinet order until the appliance list is settled than force a product into a box that was built for something else.
How is a range hood planned with the cooktop?
The hood should be wide enough and strong enough for the cooking surface under it, and the duct path has to be designed with the cabinets and the ceiling. An island cooktop needs that path even more, because there is no wall to hide the run.
Can appliances go in a kitchen island?
Yes, when the layout, the walkways, and the utility lines support them. A sink, a dishwasher, or a cooktop in the island each change plumbing, electrical, and ventilation. Those choices belong in the design, not after the island is already framed.
Do appliance changes require a permit?
They often do when a gas line, a new electrical circuit, or a relocated vent is part of the work. Kitchen Design Studio & Remodeling of Atlanta pulls the permits for the complete renovations we install and schedules the inspections.
Talk through the appliance list
If you are planning a complete kitchen renovation, bring any appliance models you already like to a free consultation, or come without a list and we will talk through what the layout can support. The earlier those choices are settled, the cleaner the cabinet and utility plan will be.
Kitchen Design Studio & Remodeling of Atlanta, 4353 Tilly Mill Road #150, Atlanta, GA 30360, (404) 997-3788. Appointments are recommended. Hours are Monday through Thursday 8:30 to 4:30 and Friday 8:30 to 3:00; we are closed Saturday and Sunday. We have been remodeling kitchens and bathrooms for 11 years, and the work we install is covered by a 1-year warranty.


